The TUS Range
TUS84R is a linked polypropylene seat with steel posts designed for fixing to raked terrace risers.
TUS84T is a linked polypropylene seat with steel posts designed for fixing to the treads of either flat or raked terraces.
TUS84U (the U is prefixed with either R for riser or T for tread) is as the TUS84R or TUS84T and complete with fully upholstered seat and back.
TUA is an ideal seat for the VIP area with its substantially padded seat and back supported by a robust steel frame; designed for fixing to the treads of either flat or raked terraces.
There are other products on offer to perfectly compliment the TUS range such as the Media Seat and Beam Options to name but two.
Riser Fixed Main Frame Assembly
- 30mm x 30mm square tube column supports, 2mm wall thickness
- 2 nr 10mm or 12mm diameter holes to facilitate riser fixing
- 2 nr 8mm slotted holes to accommodate the fixing of the backrest
- Press formed "D" section from 30mm x 6mm mild steel welded to column forming seat pivot support bracket
- Pivot pins constructed from 2 nr 10mm diameter steel rods welded to pivot support bracket with silencer tube
Tread Fixed Main Frame Assembly
As above, except:
- Addition of 150mm x 120mm x 6mm steel base plate welded to the bottom of the column support
- 5 nr 12mm diameter holes to facilitate floor fixing
- 1 nr 30 x 6mm steel gusset plate welded between the column support and tread plate for increased strength
Seat Ring
- Manufactured as a 19mm x 1.5mm wall thickness tube "U"
- Pierced with 4 nr to accommodate fixing of seat to frame
- "U" tube closed by a 16mm diameter solid steel rod, welded to perform as the counterbalance weight
- 2 nr 19mm diameter x 1.5mm wall tubes, 50mm long forming the seat pivot housing
Frame Finish
- Corrosion Resistance - All steel components are hot dip galvanised in accordance with BS EN ISO 1461:1999 ensuring a corrosion resistant barrier
- Decorative - The galvanised steel components can be electrostatically coated with a custom formulated thermoplastic coating powder. This will provide a long lasting tough coating that is resistant to stress cracking, adverse weather conditions, detergents and salt spray whilst offering a pleasing aesthetic finish.
|
Plastic Seat and Backrest
- Injection moulded to combine flexibility and strength with affordability
- A wide choice of colours available. Matching to specific BS/RAL colour references also available
- Colour and UV fading - The cocktail of ingredients are carefully chosen to ensure maximum resistance to fading and degradation. By using only pigments of blue wool scale 7-8 and special ultra violet resistant additives appropriate to the location of installation the effects of fading and degradation are minimised
Fixings
- Assembly fixings are stainless steel as standard. Hexagon set screws and nylon locking nuts provide a vandal resistant fixture
- Installation fixings are generally through bolts in either zinc plate, galvanise or stainless steel fixings although fixings appropriate to site conditions will be used
- Choice of seat numbering and end of row letter options are available to suit individual budgets
Standards & codes of practice covering the TUS84 seat
- BS 4875-1:1985
Strength and stability of chairs and stools
- BS 5852:1990
Ignitability of upholstered seating
- BS 1006:B01C
Light degradation and colour fastness of materials
- BS EN ISO 1461:1999
Hot dip galvanised coating
- Home Office Publication
The guide to safety in sports grounds
|
